For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak once you place the mask on. Be sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.
Then it is time to glue the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Be certain it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Don’t make the folds too large or else it might look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask dog mask on the dog. Be sure that the ears are flat and be certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask because your dog protection, you’ll need to do some sanding to be certain it’s secure on your dog. You can do it by sanding off any excess paper which might have been eliminated from your mask.